HP 53131A - Common Questions; Counters Numeric Display Does Not Follow the Numerical Convention for My Country; How Do I Display the 13 Th Digit in My Numerical Result; Why DID Counter Go to Its Default State after I Set up My RS-232 Port

Chapter 2 Operating Your Universal Counter
Common Questions
2-94 Operating Guide
2
Common Questions
Why is Stats result not available yet?
Your Counter has not completed N measurements yet.
Why won’t printer work?
Go to the Utility menu and set up serial port.
Why did Counter stop measuring?
• Did you set the Counter to stop on limits?
• Are all measurements outside the limits?
Why did Counter go to its default state after I set up
my RS-232 port?
• Did you save your state before you cycled power?
• Did you restore your state after configuring the port?
Counter’s numeric display does not follow the
numerical convention for my country.
• Go to the Utility menu and change the numerical convention to be
displayed (use the
SHOW 9 AS: menu item).
How do I display the 13th digit in my numerical result?
• Use the Offset feature. Instructions appear on page 2-31 and
page 2-32 in the section titled “Using the MATH Menu Keys.”