HP 53131A - Page 158

Chapter 2 Operating Your Universal Counter
Preset Values After Power-Up and *RST
2-82 Operating Guide
2
Limits Parameters
Limit test on/off yes OFF OFF no
On fail stop/go on yes GO ON GO ON no
Lower limit yes 0.0000000000 0.0000000000 no
Upper limit yes 0.0000000000 0.0000000000 no
Limit display number/graph yes NUMBER NUMBER no
Stats Parameters
Stats on/off yes OFF OFF no
Stats measurement count, N yes 100 100 no
Display measurement/stats yes MEAS MEAS no
Stats use all/in limits yes USE ALL USE ALL no
On-single measurement count yes 1 (AUTO OFF) 1 (AUTO OFF) no
Print Parameters
Printing on/off yes OFF OFF no
Timebase Parameters
Timebase auto/internal/external yes AUTO AUTO no
Expected Frequency Parameters
Channel 1 expected frequency no ________
3
________
3
no
Channel 2 expected frequency no ________
3
________
3
no
Channel 3 expected frequency no ________
3
________
3
no
Table 2-7A. HP 53131A (and HP 53132A With S/N Prefix Below 3646) Preset Values (continued)
Description
In
Save/Recall
Value at *RST
(HP-IB Reset)
Value at
Power-Up
In
Non-Volatile
Memory