HP 53131A - Page 165

Chapter 2 Operating Your Universal Counter
Preset Values After Power-Up and *RST
Operating Guide 2-89
2
Auto-Frequency Parameters
Channel 1 auto-frequency on/off no ON ON no
Channel 2 auto-frequency on/off no ON ON no
Channel 3 auto-frequency on/off no ON ON no
Trigger Offset Cal Parameters
Channel 1 trigger offset cal no ________
4
________
4
yes, (2048)
Channel 2 trigger offset cal no ________
4
________
4
yes, (2048)
Trigger Gain Cal Parameters
Channel 1 trigger gain cal no ________
4
________
4
yes, (1700)
Channel 2 trigger gain cal no ________
4
________
4
yes, (1700)
Time Interval Offset Cal
Parameters no ________
4
________
4
yes, (2100)
Utility Menu Parameters
Option Timebase cal no ________
4
________
4
yes, (2048)
HP-IB address no ________
4
________
4
yes, (3)
Digit separator (radix) no ________
4
________
4
yes, (USA
STYLE)
Baud rate, (RS-232) no ________
4
________
4
yes, (9600)
Parity, (RS-232) no ________
4
________
4
yes, (OFF)
Pacing, (RS-232) no ________
4
________
4
yes, (XON)
DTR, (RS-232) no ________
4
________
4
yes,
(DTR_HIGH)
Table 2-7B. HP 53132A (S/N 3646 and above) Preset Values (continued)
Description
In
Save/Recall
Value at *RST
(HP-IB Reset)
Value at
Power-Up
In
Non-Volatile
Memory