122
1 0.00e0-fc0e-6554 200200 0 Ethernet1/0/1
Table 31 Command output
Field Description
ExtPathCost
External path cost. The device automatically calculates the default path cost of a
port. Or, you can use the stp cost command to configure the path cost of a port.
IntPathCost
Internal path cost. The device automatically calculates the default path cost of a
port. Or, you can use the stp cost command to configure the path cost of a port.
Root Port Root port name (displayed only if a port of the device is the root port of MSTIs).
display stp tc
Syntax
display stp [ instance instance-id | vlan vlan-id ] tc [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
instance instance-id: Displays the statistics of TC/TCN BPDUs received and sent by all ports in a
particular MSTI. The value of instance-id ranges from 0 to 32, where 0 represents the CIST.
vlan vlan-id: Displays the statistics of TC/TCN BPDUs received and sent by all ports in the specified
VLAN, in the range of 1 to 4094.
slot slot-number: Displays the statistics of TC/TCN BPDUs received and sent by all ports on the specified
IRF member switch. slot-number represents the member number of the device in the IRF. If this
keyword-argument combination is not specified, this command displays the statistics of TC/TCN BPDUs
received and sent by all ports on all IRF member switches.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display stp tc to display the statistics of TC/TCN BPDUs received and sent by all ports in an MSTI or
all MSTIs.
In STP/RSTP mode, the displayed information is sorted by port name.
In MSTP mode, follow these guidelines:
To Next Page
Loading...
Need help?
General
