214
<Sysname> display garp statistics interface ethernet 1/0/1 to ethernet 1/0/2
GARP statistics on port Ethernet1/0/1
Number of GVRP Frames Received : 5
Number of GVRP Frames Transmitted : 2
Number of Frames Discarded : 1
GARP statistics on port Ethernet1/0/2
Number of GVRP Frames Received : 3
Number of GVRP Frames Transmitted : 4
Number of Frames Discarded : 2
display garp timer
Syntax
display garp timer [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Displays the GARP timer settings of one or multiple ports. You can specify up to 10
port lists.
• You can specify a single port in the form of interface-type interface-number.
• You can specify a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end port number specified by interface-number2 must be greater
than the start port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display garp timer to display GARP timers on specific ports. If no ports are specified, this command
displays the GARP timers on all ports.
Related commands: garp timer hold, garp timer join, garp timer leave, and garp timer leaveall.
Examples
# Display GARP timers on port Ethernet 1/0/1.
<Sysname> display garp timer interface ethernet 1/0/1
To Next Page
Loading...
Need help?
General
