265
MVRP commands
display mvrp running-status
Syntax
display mvrp running-status [ interface interface-list ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Specifies an Ethernet interface list in the form of interface-list = { interface-type
interface-number1 [ to interface-type interface-number2 ] }&<1-10>, where interface-type
interface-number specifies an interface by its type and number and &<1-10> indicates that you can
specify up to 10 interface-type interface-number1 [ to interface-type interface-number2 ] parameters. If
this option is not specified, this command displays MVRP running status of all MVRP-enabled trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp running-status to display the MVRP running status.
Examples
# Display the MVRP running status of all ports.
<Sysname> display mvrp running-status
-------[MVRP Global Info]-------
Global Status : Enabled
Compliance-GVRP : False
----[Ethernet1/0/1]----
Config Status : Enabled
Running Status : Enabled
Join Timer : 20 (centiseconds)
Leave Timer : 60 (centiseconds)
Periodic Timer : 100 (centiseconds)
LeaveAll Timer : 1000 (centiseconds)
Registration Type : Normal