HP 5500 HI Series Command Reference

160
Default level
1: Monitor level
Parameters
vlan-id1: Displays information about a VLAN specified by VLAN ID, in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs specified by a VLAN ID range. The vlan-id2
argument cannot be smaller than the vlan-id1 argument.
all: Displays all VLAN information but the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are generated through GVRP, MVRP, or those distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display vlan to display VLAN information.
Related commands: vlan.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN Type: static
Route interface: not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged Ports: none
Untagged Ports:
Ethernet1/0/1 Ethernet1/0/2 Ethernet1/0/3
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN Type: static
Route Interface: configured
IPv4 address: 1.1.1.1
IPv4 subnet mask: 255.255.255.0
IPv6 global unicast address(es):

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English