249
LLDP-MED extend TLV:
Capabilities TLV YES YES
Network Policy TLV YES YES
Location Identification TLV NO NO
Extended Power via MDI TLV YES YES
Inventory TLV YES YES
Table 53 Command output
Field Descri
tion
LLDP tlv-config of port 1 Advertisable optional TLVs of port 1.
NAME TLV type.
STATUS Indicates whether or not a specific type of TLV is sent through a port.
DEFAULT
Indicates whether or not a specific type of TLV is sent through a port by
default.
Basic optional TLV
Basic TLVs:
• Port description TLV
• System name TLV
• System description TLV
• System capabilities TLV
• Management address TLV
IEEE 802.1 extended TLV
IEEE 802.1 organizationally specific TLVs:
• Port VLAN ID TLV
• Port and protocol VLAN ID TLV
• VLAN name TLV
IEEE 802.3 extended TLV
IEEE 802.3 organizationally specific TLVs:
• MAC-Physic TLV
• Power via MDI TLV
• Link aggregation TLV
• Maximum frame size TLV
LLDP-MED extend TLV
LLDP-MED TLVs:
• Capabilities TLV
• Network Policy TLV
• Extended Power-via-MDI TLV
• Location Identification TLV
• Inventory TLV, including hardware revision TLV, firmware revision TLV,
software revision TLV, serial number TLV, manufacturer name TLV,
model name TLV, and asset id TLV
lldp admin-status
Syntax
lldp admin-status { disable | rx | tx | txrx }
undo lldp admin-status