243
Field Descri
tion
Link aggregation enabled
Indicates whether or not link aggregation is enabled on the port that
connects the LLDP neighboring device to the local device.
Aggregation port ID Aggregation group ID, which is 0 when link aggregation is disabled.
Maximum frame size
Maximum frame size of the port that connects the LLDP neighboring
device to the local device.
Location format
Location information format of the neighboring device which is a
communication terminal with the MED device type being Class III, for
example, an IP phone:
• Invalid—The format of the location information is invalid.
• Coordinate-based LCI—The location information is
coordinate-based.
• Civic Address LCI—Typical address information.
• ECS ELIN—Telephone for urgencies.
Location information
Location information of the neighboring device which is a
communication terminal with the MED device type being Class III, for
example, an IP phone.
PoE PSE power source
Power source type of an LLDP neighboring device which is a PSE
device:
• Unknown—Unknown power supply
• Primary—Primary power supply
• Backup—Backup power supply
PoE PD power source
PD power type of an LLDP neighboring device which is a PD device:
• Unknown—Unknown power supply
• PSE—PSE power supply
• Local—Local power supply
• PSE and local—PSE and local power supplies
Port PSE Priority
PoE power supply priority of ports on an LLDP neighboring device
which is a PSE device:
• Unknown
• Critical
• High
• Low
Port PD Priority
PoE power receiving priority of ports on an LLDP neighboring device
which is a PD device:
• Unknown
• Critical
• High
• Low
Port available power value
• Power supplied to the port when the LLDP neighboring device is a
PSE device, in watts.
• Power supplied by the port when the LLDP neighboring device is a
PD device, in watts.
Unknown basic TLV
This field appears only when the device receives unknown basic
TLVs.
To Next Page
Loading...
Need help?
General
