1
Ethernet interface configuration commands
General Ethernet interface configuration
commands
combo enable
Syntax
combo enable { copper | fiber }
View
Ethernet interface view (combo interface)
Default level
2: System level
Parameters
copper: Activates the copper combo port.
fiber: Activates the fiber combo port.
Description
Use combo enable to activate the copper or fiber combo port.
By default, the copper combo port is activated.
Combo interfaces are logical interfaces. A combo interface comprises one fiber combo port and one
copper combo port. The two ports cannot work simultaneously. If one port is enabled, the other port is
automatically disabled.
Examples
# Activate the copper combo port of combo interface GigabitEthernet 1/0/25.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/25
[Sysname-GigabitEthernet1/0/25] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 1/0/25.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/25
[Sysname-GigabitEthernet1/0/25] combo enable fiber
default
Syntax
default
To Next Page
Loading...
Need help?
General
