187
interface-type interface-number1 to interface-type interface-number2: Specifies an interface range.
interface-number2 must be no smaller than interface-number1.
all: Displays IP subnet information about all the ports with IP subnet-based VLAN configured.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip-subnet-vlan interface to display IP subnet-based VLANs and IP subnet indexes on the
specified ports.
Examples
# Display IP subnet-based VLANs and IP subnet indexes on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] display ip-subnet-vlan interface ethernet 1/0/1
Interface: Ethernet1/0/1
VLAN ID Subnet-Index IP ADDRESS NET MASK
=======================================================
3 0 192.168.1.0 255.255.255.0
Table 39 Command output
Field Descri
tion
Subnet-Index Index of the IP subnet
IP ADDRESS IP address of the subnet (either an IP address or a network address)
NET MASK Mask of the IP subnet
display ip-subnet-vlan vlan
Syntax
display ip-subnet-vlan vlan { vlan-id1 [ to vlan-id2 ] | all } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
vlan-id1: Specifies a VLAN ID, in the range of 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN range from vlan-id1 to vlan-id2, where vlan-id1 and vlan-id2
represent VLAN IDs and each range from 1 to 4094. The vlan-id2 argument must be no smaller than the
vlan-id1 argument.
To Next Page
Loading...
Need help?
General
