HP 5500 HI Series Command Reference

268
Field Descri
p
tion
App-state
Declaration state, which indicates the state of the attribute that the local participant
declares to the remote participant. The state can be VO, VP, VN, AN, AA, QA, LA,
AO, QO, AP, QP, or LO. Each state consists of two letters.
The first letter indicates the state:
• V—Very anxious, which means that the local participant has not declared the
attribute or has not received any Join message containing the attribute.
• A—Anxious, which means that the local participant has declared the attribute
once or has received one Join message containing the attribute.
• Q—Quiet, which means that the local participant has declared the attribute two
times, the local participant has declared the attribute once and has received one
Join message containing the attribute, or the local participant has received two
Join messages containing the attribute.
• L—Leaving, which means that the local participant is deregistering the attribute.
The second letter indicates the membership state:
• A—Active member, which means that the local participant is declaring the
attribute, has sent at least one Join message containing the attribute, and may
receive Join messages.
• P—Passive member, which means that the local participant is declaring the
attribute, has received Join messages containing the attribute, but has not sent
Join messages containing the attribute.
• O—Observer, which means that the local participant is not declaring the
attribute but is monitoring the attribute.
• N—New, which means that the local participant is declaring the attribute, is
receiving the Join message containing the attribute, but is not sending Join
messages for the attribute.
For example, VP indicates "Very anxious, Passive member".
Reg-state
Registration state of the attribute declared by remote participants on the local
participant. The state can be IN, LV, or MT:
• IN—Registered.
• LV—Previously registered, but now being timed out.
• MT—Not registered.
display mvrp statistics
Syntax
display mvrp statistics [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Specifies an Ethernet interface list in the form of interface-list = { interface-type
interface-number1 [ to interface-type interface-number2 ] }&<1-10>, where interface-type
interface-number specifies an interface by its type and number and &<1-10> indicates that you can

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English