269
specify up to 10 interfaces or interface ranges. If this option is not specified, this command displays
MVRP statistics of all MVRP-enabled trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp statistics to display MVRP statistics.
Examples
# Display MVRP statistics of all MVRP-enabled ports.
<Sysname> display mvrp statistics
----[Ethernet1/0/1]----
Failed Registrations : 1
Last PDU Origin : 000f-e200-0010
Frames Received : 201
New Event Received : 0
JoinIn Event Received : 1167
In Event Received : 0
JoinMt Event Received : 22387
Mt Event Received : 31
Leave Event Received : 210
LeaveAll Event Received : 63
Frames Transmitted : 47
New Event Transmitted : 0
JoinIn Event Transmitted : 311
In Event Transmitted : 0
JoinMt Event Transmitted : 873
Mt Event Transmitted : 11065
Leave Event Transmitted : 167
LeaveAll Event Transmitted : 4
Frames Discarded : 0
----[Ethernet1/0/2]----
Failed Registrations : 0
Last PDU Origin : 0000-0000-0000
Frames Received : 0
New Event Received : 0
JoinIn Event Received : 0
In Event Received : 0
JoinMt Event Received : 0
Mt Event Received : 0
Leave Event Received : 0
To Next Page
Loading...
Need help?
General
