HP 5500 HI Series Command Reference

257
Examples
# Set the LLDP trap transmit interval to 8 seconds.
<Sysname> system-view
[Sysname] lldp timer notification-interval 8
lldp timer reinit-delay
Syntax
lldp timer reinit-delay delay
undo lldp timer reinit-delay
View
System view
Default level
2: System level
Parameters
delay: Sets the LLDP re-initialization delay, ranging from 1 to 10 seconds.
Description
Use lldp timer reinit-delay to set the LLDP re-initialization delay.
Use undo lldp timer reinit-delay to restore the default.
By default, the LLDP re-initialization delay is 2 seconds.
Examples
# Set the LLDP re-initialization delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer reinit-delay 4
lldp timer tx-delay
Syntax
lldp timer tx-delay delay
undo lldp timer tx-delay
View
System view
Default level
2: System level
Parameters
delay: Sets the LLDPDU transmit delay, ranging from 1 to 8192 seconds.
Description
Use lldp timer tx-delay to set the LLDPDU transmit delay.
Use undo lldp timer tx-delay to restore the default.
By default, the LLDPDU transmit delay is 2 seconds.

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English