HP 5500 HI Series Command Reference

255
Use undo lldp management-address-format to restore the default.
By default, the management address is encapsulated in the form of numbers in TLVs.
Examples
# Configure Ethernet 1/0/1 to encapsulate the management address in the form of strings in
management address TLVs.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lldp management-address-format string
lldp management-address-tlv
Syntax
lldp management-address-tlv [ ip-address ]
undo lldp management-address-tlv
View
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default level
2: System level
Parameters
ip-address: Specifies a management address to be advertised in LLDPDUs.
Description
Use lldp management-address-tlv to enable management address advertising and set the management
address.
Use undo lldp management-address-tlv to disable management address advertising in LLDPDUs.
By default, the management address is advertised through LLDPDUs. For a Layer 2 Ethernet port, the
management address is the main IP address of the lowest-ID VLAN carried on the port. If none of the
carried VLANs is assigned an IP address, no management address will be advertised. For a Layer 3
Ethernet port, the management address is its own IP address. If no IP address is configured for the Layer
3 Ethernet port, no management address will be advertised.
An LLDPDU carries only one management address TLV. If you set the management address repeatedly,
the latest one takes effect.
In Layer 2 Ethernet interface view, if you run the lldp management-address-tlv command without
specifying the ip-address argument, the advertised management address is the main IP address of the
lowest-ID VLAN carried on the interface. If none of the carried VLANs is assigned an IP address, no
management address will be advertised.
In Layer 3 Ethernet interface view, if you run the lldp management-address-tlv command without
specifying the ip-address argument, the advertised management address is the IP address of the Layer 3
Ethernet port. If no IP address is configured for the port, no management address will be advertised.
Examples
# Set the management address to 192.6.0.1 for Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English