267
Parameters
interface interface-type interface-number: Displays the MVRP state of an interface specified by its type
and number.
vlan vlan-id: Displays the MVRP state of an interface in an VLAN specified by its VLAN ID, which ranges
from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp state to display the MVRP state of an interface in a VLAN.
Examples
# Display the MVRP state of port Ethernet 1/0/1 in VLAN 2.
<Sysname> display mvrp state interface ethernet 1/0/1 vlan 2
MVRP state of VLAN 2 on port Eth1/0/1
Port VLAN App-state Reg-state
----------- ------ ----------- -----------
Eth1/0/1 2 VP IN
Table 56 Command output
Field Descri
tion
MVRP state of VLAN 2 on
port Eth1/0/1
MVRP state of Ethernet 1/0/1 in VLAN 2.
To Next Page
Loading...
Need help?
General
