247
Port 1 [Ethernet1/0/1]:
Port status of LLDP : Enable
Admin status : Tx_Rx
Trap flag : No
Polling interval : 0s
Number of neighbors : 0
Number of MED neighbors : 0
Number of CDP neighbors : 0
Number of sent optional TLV : 23
Number of received unknown TLV : 0
Table 52 Command output
Field Descri
tion
Global status of LLDP Indicates whether or not LLDP is globally enabled.
LLDP neighbor information last
changed time
Time when the neighbor information was last updated.
Transmit interval LLDPDU transmit interval.
Hold multiplier TTL multiplier.
Reinit delay LLDP re-initialization delay.
Transmit delay LLDPDU transmit delay.
Trap interval Trap transmit interval.
Fast start times
Number of the LLDPDUs sent each time fast LLDPDU transmission is
triggered.
Port 1 LLDP status of port 1.
Port status of LLDP Indicates whether or not LLDP is enabled on the port.
Admin status
LLDP mode of the port:
• TxRx—The port sends and receives LLDPDUs.
• Rx_Only—The port only receives LLDPDUs.
• Tx_Only—The port only sends LLDPDUs.
• Disable—The port does not send or receive LLDPDUs.
Trap Flag Indicates whether or not trapping is enabled.
Polling interval LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors Number of LLDP neighbors connecting to the port.
Number of MED neighbors Number of MED neighbors connecting to the port.
Number of CDP neighbors Number of CDP neighbors connecting to the port.
Number of sent optional TLV Number of optional TLVs contained in an LLDPDU sent through the port.
Number of received unknown TLV Number of unknown TLVs contained in all received LLDPDUs.
To Next Page
Loading...
Need help?
General
