HP 6300C - ScanJet - Flatbed Scanner - Page 22

+$%&
2
HP
PrecisionScan Pro
User’s Guide
22
A tour of the scanning
software
Book Contents
Index
➮
➮
Output Resolution
When checked, shows the
Output Resolution
tool, which sets the resolution for the final
scan of the selection (see pages
31
and
90
).
Sharpen Level
When checked, shows the
Sharpen Level
tool, which sets the amount of sharpening for
the image (see pages
33
and
75
).
Dimensions
When checked, shows the
Dimensions
tool, which contains fields for setting the width
and height of the selection area, scaling, and setting the width and height of the image
that will be saved, printed, copied, or dragged and dropped (see pages
34
and
65
).
Exposure Adjustment
When checked, shows the
Exposure Adjustment
tool, which sets highlights, shadows,
and midtones in the image, and displays pixel distribution, pixel color, and pixel output
levels (see pages
36
and
77
).
Color Adjustment
When checked, shows the
Color Adjustment
tool, which sets color balance (hue) and
color saturation in the image (see pages
37
and
87
).
B & W Threshold
When checked, shows the
Black & White Threshold
tool, which sets the threshold and the
color channel for an image set to the
Black & White Bitmap (raster)
output type (see
pages
38
,
92
, and
94
).
Invert
When checked, inverts the image (for example, reverses the black and white areas in a
black-and-white image) (see page
39
).
Use Transparency
Adapter
When checked, scans the image from the Active Transparency Adapter instead of the
scanner bed (see page
40
).
Reset Controls
Resets the controls in all tools, except the
Dimensions
tool, to their optimal (default)
values.
Not all tools are active for all output types.
TIP
T ools