HP FlexNetwork MSR2003 User Manual

41
• If you use the network or address range command multiple times for the same address pool,
the most recent configuration takes effect.
• IP addresses specified by the forbidden-ip command are not assignable in the current address
pool, but are assignable in other address pools. IP addresses specified by the dhcp server
forbidden-ip command are not assignable in any address pool.
To specify a primary subnet and multiple address ranges for a DHCP address pool:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Create a DHCP user class and
enter DHCP user class view.
dhcp class
class-name
Required for client
classification.
By default, no DHCP user
class exists.
3. Configure the match rule for
the DHCP user class.
if-match rule
rule-number {
option
option-code [
hex
hex-string [
mask
mask |
offset
offset
length
length ] ] |
hardware-address
hardware-address
mask
hardware-address-mask }
Required for client
classification.
By default, no match rule is
configured for a DHCP user
class.
4. Return to system view.
quit
N/A
5. Create a DHCP address pool
and enter its view.
dhcp server ip-pool
pool-name
By default, no DHCP address
pool exists.
6. Specify the primary subnet for
the address pool.
network
network-address
[ mask-length |
mask
mask ]
By default, no primary subnet
is specified.
7. (Optional.) Specify the
common address range.
address range
start-ip-address
[ end-ip-address ] [
vpn-instance
vpn-instance-name ]
By default, no IP address
range is specified.
8. (Optional.) Specify an IP
address range for a DHCP user
class.
class
class-name
range
start-ip-address end-ip-address
By default, no IP address
range is specified for a user
class.
The DHCP user class must
already exist.
To specify address ranges for
multiple DHCP user classes,
repeat this step.
9. (Optional.) Set the address
lease duration.
expired
{
day
day [
hour
hour
[
minute
minute [
second
second ] ] ] |
unlimited
}
The default setting is 1 day.
10. (Optional.) Exclude the
specified IP addresses in the
address pool from dynamic
allocation.
forbidden-ip
ip-address&<1-8>
By default, all the IP
addresses in the DHCP
address pool are assignable.
To exclude multiple address
ranges from dynamic
allocation, repeat this step.
11. Return to system view.
quit
N/A
12. (Optional.) Exclude the
specified IP addresses from
automatic allocation globally.
dhcp server forbidden-ip
start-ip-address [ end-ip-address ]
By default, except for the IP
address of the DHCP server
interface, all IP addresses in
address pools are assignable.
To exclude multiple IP
address ranges, repeat this
step.

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English