HP FlexNetwork MSR2003 User Manual

421
To apply a WAAS policy to an interface:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type interface-number
N/A
3. Apply a WAAS policy to
the interface.
waas apply policy
[ policy-name ]
By default, no WAAS policy
is applied to an interface.
Configuring TFO parameters
The congestion window size changes with the congestion status and transmission speed. An
appropriate initial congestion window size can quickly restore the network to its full transmission
capacity after congestion occurs.
After you enable TFO keepalives, the system starts the 2-hour TCP keepalive timer. If the local
device does not send or receive any data when the timer expires, it sends a keepalive to the peer to
maintain the connection.
The receiving buffer size specifies the size of data that can be received. It affects network
throughput.
To configure TFO parameters:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the initial congestion
window size.
waas tfo base-congestion-window
segments
The default setting is two
segments.
3. Enable TFO keepalives.
waas tfo keepalive
By default, TFO keepalives are
disabled.
4. Set the receiving buffer
size.
waas tfo receive-buffer
buffer-size The default setting is 64 KB.
Configuring the TFO blacklist autodiscovery
feature
This feature automatically discover servers that cannot receive TCP packets with options and adds
the server IP addresses and port numbers to a blacklist. The system automatically removes blacklist
entries after a user-configured aging time.
During the 3-way handshake, the local device considers the TCP connection attempt failed if either
of the following situations occurs:
• The peer device does not respond within the specified time period.
• The peer device closes the TCP connection.
To configure the TFO blacklist autodiscovery feature:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable the TFO blacklist
autodiscovery feature.
waas tfo auto-discovery blacklist
enable
By default, the TFO blacklist
autodiscovery feature is

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English