HP FlexNetwork MSR2003 User Manual

193
Step Command Remarks
2. Specify the source
address for outgoing
ICMP packets.
ip icmp source
[
vpn-instance
vpn-instance-name ]
ip-address
By default, the device uses the IP
address of the sending interface as the
source IP address for outgoing ICMP
packets.
Enabling IPv4 local fragment reassembly
Perform this task to enable the local reassembly feature for IPv4 fragments that are destined for the
local device. This feature enables the receiving LPU to reassemble the IPv4 fragments instead of
delivering them to the active MPU for reassembly. It improves the fragment reassembly
performance.
To enable IPv4 local fragment reassembly:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable IPv4 local
fragment reassembly.
ip reassemble local enable
By default, IPv4 local fragment
reassembly is disabled.
This feature applies only to fragments
received by the same LPU.
Displaying and maintaining IP performance
optimization
Execute display commands in any view and reset commands in user view.
Task Command
Display brief information about RawIP connections
(centralized devices in standalone mode).
display rawip
Display brief information about RawIP connections
(distributed devices in standalone mode/centralized devices in
IRF mode).
display rawip
[
slot
slot-number ]
Display brief information about RawIP connections
(distributed devices in IRF mode).
display rawip
[
chassis
chassis-number
slot
slot-number ]
Display detailed information about RawIP connections
(centralized devices in standalone mode).
display rawip verbose
[
pcb
pcb-index ]
Display detailed information about RawIP connections
(distributed devices in standalone mode/centralized devices in
IRF mode).
display rawip verbose
[
slot
slot-number
[
pcb
pcb-index ] ]
Display detailed information about RawIP connections
(distributed devices in IRF mode).
display rawip verbose
[
chassis
chassis-number
slot
slot-number [
pcb
pcb-index ] ]
Display brief information about TCP connections (centralized
devices in standalone mode).
display tcp
Display brief information about TCP connections (distributed
devices in standalone mode/centralized devices in IRF mode).
display tcp
[
slot
slot-number ]

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English