HP FlexNetwork MSR2003 User Manual

331
Solution
1. Execute the display ip routing-table command on Device A and Device C to view whether
Device A has a route over tunnel 0 to 10.2.0.0/16 and whether Device C has a route over tunnel
0 to 10.1.0.0/16.
2. If such a route does not exist, execute the ip route-static command in system view to add the
route. Take Device A as an example:
[DeviceA] ip route-static 10.2.0.0 255.255.0.0 tunnel 0

HP FlexNetwork MSR2003 Specifications

General

Brand	HP
Model	FlexNetwork MSR2003
Category	Network Router
Language	English