HP StorageWorks 12000 User Manual

Usage
1
Command
Specifies an E-mail server with an SMTP gateway to route notification alerts from
the VLS. Where the options are:
-a <s> - E-mail server address (required)
-c <s> - node IP address (required)
-s <s> - Sender email address (optional)
-h - Displays command usage information (optional)
addEmailServer
Returns the E-mail server configuration settings for notification alerts.
getEmailServer
Deletes the specified E-mail server from the E-mail notification alerts settings. Where
the options are:
-a <s> - E-mail server address (required)
-c <s> - VLS node IP address (required)
-f - Force - This parameter is ignored and is present only for backward
compatibility (optional)
-h - Displays command usage information (optional)
deleteEmailServer
Adds an E-mail address and desired report formatting to the E-mail notification
alert settings. Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS IP address (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (optional)
-y <n> - E-mail type (1-Long with attachment, 2-Long, 4-Short, or 8-Reports)
(optional)
-h - Displays command usage information (optional)
-f <n> - Notification frequency (0-None, 1-Daily, 2-Weekly, 3-Bi-weekly, or
4-Monthly) (optional)
addEmail
Returns the report settings for each E-mail address configured for notification alerts.
getEmail
Deletes the specified E-mail address from the E-mail notification alert settings.
Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-y <n> - Email type (1-long with attachment, 2-long, 4-short, 8-reports,
16-configuration) (required)
-h - Displays command usage information (optional)
deleteEmail
Specifies an SNMP management console to receive SNMP traps from the VLS.
Where the options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-m <s> - Community (Public, ...) (required)
-v <s> - Trap version (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (required)
-h - Displays command usage information (optional)
addSnmpServer
HP StorageWorks 12000 Gateway Virtual Library System User Guide 177

HP StorageWorks 12000 Specifications

General

Product Name	HP StorageWorks 12000
Management Software	HP StorageWorks Command View
Form Factor	Rack-mountable
Type	Gateway
Category	Gateway
Connectivity	iSCSI