HP StorageWorks 12000 User Manual

5. Verify the network settings have been changed by entering:
showConfig
Setting the Network Settings using Command View VLS
To set the network settings using Command View VLS, set either the:
• DHCP usage and host name, or
• Fully qualified host name (or host name and DNS domain name separately), DNS server address,
IP address, gateway, and netmask
To set the network settings using Command View VLS:
1. Click the System tab.
2. Select Chassis in the navigation tree.
3. Select Set Network Configuration under Maintenance Tasks.
4. Current network configuration, NTP settings, and time zone settings are displayed. Modify these
as needed (Figure 18).
Figure 18 Set Network Configuration Wizard window
.
HP StorageWorks 12000 Gateway Virtual Library System User Guide 115

HP StorageWorks 12000 Specifications

General

Product Name	HP StorageWorks 12000
Management Software	HP StorageWorks Command View
Form Factor	Rack-mountable
Type	Gateway
Category	Gateway
Connectivity	iSCSI