HP StorageWorks 12000 User Manual

2. Slide the power supply into the bay until it clicks.
3. Use the strain relief clip to secure the power cord.
4. Connect the power cord to the power supply.
5. Be sure that the power supply LED is green.
6. Be sure that the front panel external health LED is green.
Fan Module
CAUTION:
Do not operate the node for long periods without the access panel. Operating the node without the
access panel results in improper airflow and improper cooling that can lead to thermal damage.
1. Power off the node.
2. Extend or remove the node from the rack. See Extending the Node from the Rack or Removing
a VLS Node from the Rack.
3. Remove the access panel.
Component Replacement202

HP StorageWorks 12000 Specifications

General

Product Name	HP StorageWorks 12000
Management Software	HP StorageWorks Command View
Form Factor	Rack-mountable
Type	Gateway
Category	Gateway
Connectivity	iSCSI