LUN mask was removed for LUN %d.
InfoUser
qapisetlunmask_1_svc:
Lunmask removed for LUN
%d
151895
Management port configuration has changed.InfoUser
qapisetmgmintfc-
params_1_svc:Management
port configuration
changed
151896
Router configuration has changed.InfoUser
qapisetbridgebasi-
cinfo_1_svc:Bridge config-
uration changed
151897
GE port %d was enabled user.
InfoUser
GE%d: Port status changed
by user to ENABLED.
151908
GE port %d was disabled by user.
InfoUser
GE%d: Port status changed
by user to DISABLED.
151909
FC port %d was enabled by user.
InfoUser
FC%d: Port status changed
by user to ENABLED.
151910
FC port %d was disabled by user.
InfoUser
FC%d: Port status changed
by user to DISABLED.
151911
Target at WWPN: xx.xx.xx.xx.xx.xx.xx.xx has
been mapped to iSCSI portal %d.
InfoUser
qapimaptarget-
device_1_svc: Target
WWPN:
%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x
mapped to iSCSI portal
%d.
151912
Target at WWPN: xx.xx.xx.xx.xx.xx.xx.xx has
been unmapped from iSCSI portal %d.
InfoUser
qapimaptarget-
device_1_svc: Target
WWPN:
%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x
unmapped from iSCSI
portal %d.
151913
Initiators configuration has changed.InfoUser
qapiaddmodifyinitiat-
or_1_svc : Initiator Con-
figuration Changed
152082
Initiator has been removed.InfoUser
qapiremoveinitiator_1_svc
: Initiator Removed
152083
Left power and cooling module (PCM) is or
has been installed.
InfoUser
sysTempMon: Left PCM In-
stalled
152129
Left PCM is or has been uninstalled.InfoUser
sysTempMon: Left PCM Un-
installed
152130
Right PCM is or has been installed.InfoUser
sysTempMon: Right PCM In-
stalled
152131
Right PCM is or has been uninstalled.InfoUser
sysTempMon: Right PCM Un-
installed
152132
Log messageslog messages224
To Next Page
Loading...
Need help?
General