HP StorageWorks 8/24 - SAN Switch - 8;80 Fan Assembly Overview; SAN Switch Fan Assemblies on the Nonport Side

8/80 fan assembly overv iew
The 8/80 SAN Switch integrates three fan assemblies (see Figure 25).
Fabric OS identifies the fans fr om left to right as Fan assembly #3, Fan assembly #2, and Fan assembly #1.
Scale: 1/8" = 1"
A
T
T
E
N
T
IO
N
:
M
a
x
im
um
sc
rew
len
gt
h f
o
r ra
c
k
m
o
u
nting
to
be
5
m
m
or
1
3
/
6
4
in.
Scale:
5/16" = 1"
26460a
1
2
3
45
18/80SANSwitch
4Fanassembly#2
2 Nonport side 5. Fan assembly #1
3Fanassembly#3
Figure 25 8 /80 SAN Switch fan as semblies on the nonport sid e
CAUTION:
Disassembling any part of the fan assembly voids the part warranty and regulatory certifications.
There are no user-serviceable parts inside the fan assembly. Because the cooling system relies on
pr essurized air, do not leave any of the fan assembly slots empty longer than two minutes while the
switch is operating. If a fan assembly fails, leave it in the switch until it can be replaced. Maintain all
three fan assemblies in operational condition to provide redundancy.
8Gb SAN Switch hardware reference manual
57