Electromagneti
c compatibility (EMC)
Table 18 lists EMC compa tibility.
Table 18 EMC compatibility
Country
Safety
EMC
United States
Bi_Nat UL/CSA 60950-1 1st Ed
or latest
ANSI C63.4
Canada
Bi_Nat UL/CSA 6
09 5 0-1 1st Ed
or latest
ICES-003 Class A
Japan
CISPR22 and JEIDA (Harmonics)
European Community
EN60950-1 or latest EN55022 and EN55024
Australia/New Zealand
EN55022 or CIS
PR22 or AS/NZS
CISPR22
Argentina
IEC60950-1 or latest
Ru ss ia n Fe d era t io n IEC 60950 -1 o r l ate st 51318 . 22- 99 a nd 51318 . 24 .99
Korea
KN22 and KN24
China (PS only)
GB4943-2001 and GB9254-1998
or latest
GB17625.1-2003 or latest
Taiwan (PS only) CNS 14336(94) or latest CNS 13438(95) or latest
Power supply specifications
The power supplies are universal and capable of functioning worldwide without using voltage jumpers
or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply integrates its own built-in fan for
cooling, pushing the air forward toward the port side of the switch.
Table 19 lists the p ower supply specifications.
Table 19 Power supply specifications
Specification
Description
Inlet
C13
Maximum output from each power
supply
8/8 and 8/24 SAN Switches: 75 W, with fans operating
nl
8/40 SAN Switch: 125 W, with fans operating
nl
8/80 SAN Switch: 300 W, with fans operating
System power consumption
8/8and8/24SANSwitches:48Wnominal,57W
maximum
nl
8/40 SAN Sw itch: 84 W nominal, 91 W maximum
nl
8/80 SAN Switch: 260 W nominal, 300 W maximum
Input voltage
8/8, 8/24 and 8/40 SAN Switches: 85–264 VAC
universal
nl
8/80 SAN Switch: 90–264 VAC universal
8Gb SAN Switch hardware reference manual
65
To Next Page
Loading...
