4. Verify that the fan status LED is lit steady green to indicate normal operation.
5. Optionally, display the fan status using the fanShow command from the CLI.
8/80 SAN Switch and Encryption SAN Switch FRU units
Replace the following FRUs as required:
• Fan assembly
• Power supply
The 8/80 SAN Switch and Encryption SAN Switch integrate three fan assemblies (see Figure 32).
Fabric OS identifies the fans from left to right as Fan assembly #3, Fan assembly #2, and Fan assembly
#1.
8-Gb SAN Switch hardware reference manual 73
To Next Page
Loading...
Need help?
General