HP StorageWorks MSL8096 - Drive Information (Status;Information > Drive Information); Component Status (Status;Information > Component Status)

1. From the Home screen press Previous or Next until the screen displays Status/Information. Press
Enter to select.
2. Press Previous or Next until the screen displays Library Information. Press Enter to select.
By using Previous or Next, you can select from the following information screens:
• Library Time
• Firmware rev.
• Product ID
• Serial number
• SCSI ID and LUN (SCSI devices only)
• Slots and Mailslots
• Master drive
• Odometer
• Power On Time
• WWide Node Name for the FC node to which the Library is connected. (Fibre Channel
devices only)
Drive information (Status/Information > Drive Information)
To obtain drive information:
1. From the Home screen, press Previous or Next until the screen displays Status/Information. Press
Enter to select.
2. Press Previous or Next until the screen displays Drive 1 Information or Drive 2 Information. Press
Enter to select.
3. By using Previous or Next, you can select from the following information screens:
• Serial number
• Drive type
• Firmware revision
• SCSI ID (parallel SCSI tape drives only)
For a Fibre Channel tape drive, you can also select from the following information screens:
• The WWide Node Name for the FC node to which the tape drive is connected.
• The WWide Port Name and Port Type for Port A.
• The WWide Port Name and Port Type for Port B.
World Wide names are assigned automatically; they cannot be configured.
Component status (Status/Information > Component Status)
To obtain component status:
1. From the Home screen, press Previous or Next until the screen displays Status/Information. Press
Enter to select.
2. Press Previous or Next until the screen displays Component Status. Press Enter to select.
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 111