HP StorageWorks MSL8096 - Setting the Date and Time; Configuration: Password Page

NOTE:
You must set the administrator password with the OCP before you can access administrator functionality
in the RMI. For MSL2024, see “Changing the administrator password (Configuration > Change Admin
Password)” on page 113. For MSL4048, MSL8048, and MSL8096, see “Changing the administrator
password (Configuration > Set Admin Password)” on page 144.
Figure 63 Configuration: Password page
.
You may change the:
• Password — The password is exactly eight numbers, each from 0 to 9.
• Password Time Out — The number of minutes that the current administrator login session will remain
logged in without user interaction.
Setting the date and time
Use the Configuration: Date/Time page to set the date and time.
NOTE:
The device does not adjust its time to daylight saving time; the time must be adjusted manually.
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 93