Removing and replacing a front LFF drive backplaneRemoving and replacing a front LFF drive backplane
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the fan cage.
6. Remove all drives.
7. Disconnect all cables connected to the backplane.
8. Remove the LFF backplane assembly.
9. Remove the drive backplane.
To Next Page
Loading...
