Removing and replacing the SFF optical driveRemoving and replacing the SFF optical drive
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the fan cage.
6. Disconnect all cables from the SFF universal media bay.
7. Remove the SFF universal media bay .
8. Remove the optical drive.
9. Remove the optical drive bracket and retain for use with the replacement optical drive.
To Next Page
Loading...
