ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a processor or heatsinkRemoving and replacing a processor or heatsink
PrerequisitesPrerequisites
Identify the heatsink and processor socket components.
Review the processor cautions.
Before you perform this procedure, make sure that you have the following items available:
T-30 Torx screwdriver
Alcohol wipe
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal system
components to cool before touching them.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
To Next Page
Loading...
