Remove the server from the rack .
5. Remove the access panel .
6. If installed, remove the secondary riser cage .
7. Remove the OCP 3.0 adapter.
To replace the component, reverse the removal procedure.
Removing and replacing the left chassis earRemoving and replacing the left chassis ear
About this taskAbout this task
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack .
4. Remove the left chassis ear.
To Next Page
Loading...
