IMPORTANT:IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of DIMMs
by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a known working DIMM.
Rear panel componentsRear panel components
ItemItem DescriptionDescription
1 Primary riser slots 1–3 (optional drive cage)
2 Secondary riser slots 4–6 (optional drive cage)
3 Tertiary riser slots 7–8 (optional drive cage)
4 Power supply 1 (PS1)
5 Power supply 2 (PS2)
6 Video port (VGA)
7 OCP slot 15
8 Serial port (optional)
9 iLO Management Port
10 USB 3.2 Gen 1 ports
11 OCP slot 14
Rear panel LEDsRear panel LEDs
To Next Page
Loading...
