ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a power supply blankRemoving and replacing a power supply blank
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply, power supply blank, or dual slot
power supply adapter to cool before touching it.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
1. Remove the power supply blank.
2. Immediately install the replacement power supply blank spare.
To Next Page
Loading...
