ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the LFF optical driveRemoving and replacing the LFF optical drive
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the fan cage.
6. Remove the LFF universal media bay .
To Next Page
Loading...
