7. Remove the optical drive.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a front SFF drive cageRemoving and replacing a front SFF drive cage
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
This procedure applies to all front boxes.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove all drives.
To Next Page
Loading...
