HPE ProLiant MicroServer Gen10 Maintenance And Service Guide

HPE ProLiant MicroServer Gen10
Maintenance and Service Guide
Part Number: 872673-003
Published: August 2018
Edition: 3
Abstract
This document contains information on the hardware spare parts supported by the server and
the relevant component replacement procedures. This document is intended for the person
who installs, administers, and troubleshoots server or storage products. Hewlett Packard
Enterprise assumes that you are qualified to service computer equipment, and are trained in
recognizing hazards in products with hazardous energy levels.

HPE ProLiant MicroServer Gen10 Specifications

General

Product Line	HPE ProLiant
Server Type	MicroServer
Maximum Memory	32 GB
Memory Slots	2
Expansion Slots	1 PCIe 3.0 x8 slot
Form Factor	Ultra Micro Tower
Processor	AMD Opteron X3000 series
Memory Type	DDR4 ECC UDIMM
Storage	4 LFF non-hot plug drive bays
Network	2 x 1GbE ports
Power Supply	200W Non-Hot-Plug, Non-Redundant Power Supply
Dimensions	23.5 x 23 x 25.4 cm
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Management	HPE iLO Standard
RAID Support	HPE Smart Array S100i SR Gen10 (RAID 0, 1, 10)