8. To change from the current directory to the directory that contains the binary file, enter the cd
command.
9. To flash the system ROM from the downloaded binary file, enter the flashbios.nsh command.
10. Reboot the server .
A reboot is required after the firmware update in order for the updates to take effect and for hardware
stability to be maintained.
Online Flash components
Online Flash components provide updated system firmware that can be installed directly on supported
operating systems. To download this component, go to the Hewlett Packard Enterprise Support Center
website (http://www.hpe.com/support/hpesc). Under Select your HPE product, enter the product
name or number, and then click Go. To update the firmware, follow the instructions inside the firmware
update package. The firmware update takes effect after rebooting the server.
Drivers, firmware, and software updates
IMPORTANT: Always perform a backup before installing or updating device drivers.
• For the latest option ROM and driver updates for Hewlett Packard Enterprise hardware options,
download the individual drivers, firmware, and components from the Hewlett Packard Enterprise
Support Center website (http://www.hpe.com/support/hpesc). Under Select your HPE product,
enter the product name or number, and then click Go.
• For the latest system ROM and other systems software components, download the individual drivers,
firmware, and components from the server download page on the Hewlett Packard Enterprise website:
http://www.hpe.com/downloads/microservergen10
80 Online Flash components
To Next Page
Loading...
Need help?
General
