HPE ProLiant MicroServer Gen10 Maintenance And Service Guide

Description Spare part number
200 W power supply 874739-001
For more information on the removal and replacement procedures, see Replacing the power supply on
page 60.
Server options
Hewlett Packard Enterprise continually improves and changes product parts. For complete and current
supported spare parts information, see the Hewlett Packard Enterprise PartSurfer website:
http://www.hpe.com/info/partssurfer
Item Description
1 Optical drive
For more information on the removal and replacement procedures, see Replacing an
optical drive on page 36.
2 Solid state drive
For more information on the removal and replacement procedures, see Replacing an SSD
on page 39.
3 LFF non-hot-plug hard drive
For more information on the removal and replacement procedures, see Replacing an LFF
drive on page 31.
4 Network controller
For more information on the removal and replacement procedures, see Replacing an
expansion board on page 53.
Table Continued
18 Server options

HPE ProLiant MicroServer Gen10 Specifications

General

Product Line	HPE ProLiant
Server Type	MicroServer
Maximum Memory	32 GB
Memory Slots	2
Expansion Slots	1 PCIe 3.0 x8 slot
Form Factor	Ultra Micro Tower
Processor	AMD Opteron X3000 series
Memory Type	DDR4 ECC UDIMM
Storage	4 LFF non-hot plug drive bays
Network	2 x 1GbE ports
Power Supply	200W Non-Hot-Plug, Non-Redundant Power Supply
Dimensions	23.5 x 23 x 25.4 cm
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Management	HPE iLO Standard
RAID Support	HPE Smart Array S100i SR Gen10 (RAID 0, 1, 10)