HPE ProLiant MicroServer Gen10 Maintenance And Service Guide

Illustrated parts catalog
This chapter lists the hardware spare parts supported by the server.
System components
Hewlett Packard Enterprise continually improves and changes product parts. For complete and current
supported spare parts information, see the Hewlett Packard Enterprise PartSurfer website:
http://www.hpe.com/info/partssurfer
Item Description
1 Fan spare part on page 16
2 Four bay non-hot-plug drive cable assembly spare part on page 17
3 System board assembly spare parts on page 17
4 System battery spare part on page 17
5 DIMM spare parts on page 17
6 Power supply spare part on page 17
Fan spare part
Customer self repair on page 6: Mandatory
Description Spare part number
Fan 874740-001
For more information on the removal and replacement procedures, see Replacing the fan on page 57.
16 Illustrated parts catalog

HPE ProLiant MicroServer Gen10 Specifications

General

Product Line	HPE ProLiant
Server Type	MicroServer
Maximum Memory	32 GB
Memory Slots	2
Expansion Slots	1 PCIe 3.0 x8 slot
Form Factor	Ultra Micro Tower
Processor	AMD Opteron X3000 series
Memory Type	DDR4 ECC UDIMM
Storage	4 LFF non-hot plug drive bays
Network	2 x 1GbE ports
Power Supply	200W Non-Hot-Plug, Non-Redundant Power Supply
Dimensions	23.5 x 23 x 25.4 cm
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Management	HPE iLO Standard
RAID Support	HPE Smart Array S100i SR Gen10 (RAID 0, 1, 10)