HPE ProLiant MicroServer Gen10 Maintenance And Service Guide

Component identification
This chapter describes the external and internal server features and components.
Front panel components
Item Component Description
1 Drive bays (4, behind the front
bezel)
By default, the drive bays support 3.5-inch LFF SATA
drives.
To support 2.5-inch SFF drives, install the SFF drive
converter option.
2 Front bezel unlock indicator To remove the front bezel from the chassis, this groove
must show the blue indicator.
3 Front bezel lock indicator To lock the front bezel in the chassis, this groove must show
the blue indicator.
4 Front bezel To access the front drive bays, remove this bezel.
5 USB 3.0 ports (2) Connect USB 3.0 devices to these ports. USB 3.0 support
after POST varies by operating system.
6 Media bay When the relevant enablement options kits are installed,
this bay supports either a slim-type optical disc drive or
solid state drive option.
Component identification 81

HPE ProLiant MicroServer Gen10 Specifications

General

Product Line	HPE ProLiant
Server Type	MicroServer
Maximum Memory	32 GB
Memory Slots	2
Expansion Slots	1 PCIe 3.0 x8 slot
Form Factor	Ultra Micro Tower
Processor	AMD Opteron X3000 series
Memory Type	DDR4 ECC UDIMM
Storage	4 LFF non-hot plug drive bays
Network	2 x 1GbE ports
Power Supply	200W Non-Hot-Plug, Non-Redundant Power Supply
Dimensions	23.5 x 23 x 25.4 cm
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Management	HPE iLO Standard
RAID Support	HPE Smart Array S100i SR Gen10 (RAID 0, 1, 10)