B222s User’s Guide 149
CHAPTER 17
Traffic Status
17.1 Overview
Use the Traffic Status screens to look at network traffic status and statistics of the WAN, LAN
interfaces and NAT.
17.1.1 What You Can Do in this Chapter
•Use the WAN screen to view the WAN traffic statistics (Section 17.2 on page 149) .
•Use the LAN screen to view the LAN traffic statistics (Section 17.3 on page 150).
•Use the NAT screen to view the NAT status of the LTE Device’s client(s) (Section 17.4 on page
151).
•Use the VoIP Status screen to view the VoIP traffic statistics (Section 17.5 on page 152).
17.2 The WAN Status Screen
Click System Monitor > Traffic Status to open the WAN screen. You can view the WAN traffic
statistics in this screen.
Figure 83 System Monitor > Traffic Status > WAN
The following table describes the fields in this screen.
Table 62 System Monitor > Traffic Status > WAN
LABEL DESCRIPTION
Status This shows the number of bytes received and sent through the WAN interface of
the LTE Device.
Refresh Interval Select how often you want the LTE Device to update this screen from the drop-
down list box.
To Next Page
Loading...
