321
19.54.10 Why is the success rate of finding my phone using voice
instruction too low?
The environment noise is large or the microphone's hole is blocked.
19.54.11 Why can't I use a wakeup keyword fewer than four
syllables?
Through the tests, it is found that the success wakeup rate using wakeup keywords with four
or more syllables is high and the wakeup error rate is low. Therefore, the number of syllables
is restricted to provide you a better wakeup experience.
19.54.12 Why does my phone require me to record wakeup
keywords before using the speech awareness function?
This requirement is to make your phone better learn your voice features and provide you a
better speech awareness experience.
19.54.13 Can I use a more complex voice instruction, for example,
music or navigation?
We hope to deeply research and optimize the most common and required voice input
scenarios. Therefore, currently, we design the voice instructions for making phone calls and
finding your phone. The instructions for playing music or performing navigation may be
planned in later versions.
19.54.14 Why does my phone call a different contact when I input
voice instructions?
Currently, the success identification rate can't achieve 100% in the industry. If the
pronunciations of two contacts are similar, your phone may incorrectly identify the voice
instruction. The voice identification algorithm engine will be further optimized.
19.54.15 Why isn't the flash on after my phone responds to my
speech awareness instruction?
When the battery level is higher than 20%, the flash is turned on to help you find your phone.
However, if the battery level is low, the flash is not on to save power.
19.54.16 Does the speech awareness function consume too much
power if it is always enabled?
This function appreciably increases the power consumption if it is always enabled. It does not
cause obvious impacts on your daily use. Therefore, you can enable it.
To Next Page
Loading...
