17
1.60 How can I reconnect the wrist band and my phone
after the Bluetooth connection is interrupted?
1. The wrist band is connected to only one phone
− The phone actively disconnects from the Bluetooth device (disabling the Bluetooth
function on the phone or manually disconnecting the connection).
− Within 3 min, if the Bluetooth function is enabled on the phone, the phone and the
wrist band are automatically connected.
− In 3 min, the Bluetooth function of the wrist band is disabled due to expiry, and you
need to press the side button on the wrist band to enable the Bluetooth function. Then,
the phone and the wrist band can be connected.
Disconnect the Bluetooth connection by making the distance between the phone and the
wrist band greater than the Bluetooth working range:
− If the distance between the wrist band and the phone is restored within the specified
range within 20 min, the wrist band and the phone are automatically connected.
− If the disconnection exceeds 20 min, the wrist band automatically disables the
Bluetooth function to save power. After the wrist band re-enters the Bluetooth
coverage area of the phone, you can press the side button on the wrist band to awaken
the Bluetooth function, so that the wrist band can connect to the phone.
2. The wrist band is connected to two phones
If the Bluetooth function of one phone actively disconnects from the wrist band, the
Bluetooth function of the phone is automatically connected to the wrist within 3 min. In
3 min, you need to press and hold the button on the headset for 3s and select the
Bluetooth icon to connect the phone and the wrist.
− Both phones actively disconnect the Bluetooth simultaneously.
Within 3 min, if the Bluetooth function is enabled on both phones, the phones and the
wrist band are automatically connected. If one phone is connected to the wrist band
but the other one is not, within 3 min, the second phone have 3 min to automatically
connect to the wrist band. If the second phone fails to connect to the wrist band in 3
min, you need to press and hold the side button on the wrist band for 3s and select the
Bluetooth icon to connect the second phone and the wrist.
− Two phones are disconnected from the wrist band by making their distances from the
wrist band greater than the Bluetooth working range.
a. If the distance between the wrist band and both phones is restored within the
specified range within 20 min, the wrist band and the phones are automatically
connected. If one phone is connected to the wrist band but the other one is not, within
3 min, the second phone have 3 min to automatically connect to the wrist band. If the
second phone fails to connect to the wrist band in 3 min, you need to press and hold
the side button on the wrist band for 3s and select the Bluetooth icon to connect the
second phone and the wrist.
b. If the disconnection exceeds 20 min, the wrist band automatically disables the
Bluetooth function to save power. After the wrist band re-enters the Bluetooth
coverage area of the phone, you can press the side button on the wrist band to awaken
the Bluetooth function, so that the wrist band can connect to the phone. If one phone
is connected to the wrist band but the other one is not, within 3 min, the second phone
have 3 min to automatically connect to the wrist band. If the second phone fails to
connect to the wrist band in 3 min, you need to press and hold the side button on the
wrist band for 3s and select the Bluetooth icon to connect the second phone and the
wrist.
To Next Page
Loading...
