Step 4 Click to add the network disk.
NOTE
After having saved successfully, you need to reboot the camera to activate the settings.
----End
Initialize the added network disk.
Step 1 Enter the HDD Settings interface (Advanced Configuration > Storage > Storage Management),
in which you can view the capacity, free space, status, type and property of the disk.
Figure 9-2 Initialize Disk
Step 2 If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk
and click
to start initializing the disk.
When the initialization completed, the status of disk will become Normal.
Figure 9-3 View Disk Status
Step 3 Define the quota for record and pictures.
1. Input the quota percentage for picture and for record.
2. Click and refresh the browser page to activate the settings.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
9 Storage Settings
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109
To Next Page
Loading...
