Huawei IPC6131-WD-A - Connecting an IPC over the Internet; Static IP Connection

Figure 5-2 Connecting through a switch or router (LAN)
5.2
Connecting an IPC over the Internet
5.2.1 Static IP Connection
Before you start, obtain a static IP address from your Internet Service Provider (ISP).
With the static IP address, you can connect an IPC to the Internet directly or through a router.
Connecting an IPC Directly
Directly connect an IPC to the Internet through a network cable.
Figure 5-3 Connecting directly through a network cable (Internet)
Connecting an IPC through a Router
Step 1 Connect the IPC to the router.
Step 2 In the camera, set the LAN IP address, subnet mask, and gateway.
Step 3 In the router, set the static IP address.
Step 4 Set port mapping, such as 80, 8000, 8200, and 554 ports.
The procedure for port mapping varies with routers. Seek help from the router manufacturer for
port mapping.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
5 Network Connection and Setup
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57