NOTE
l Service varies according to the different camera models.
l For the camera doesn't support IR LED, ABF, or Status LED, the hardware service will not be displayed
on the page.
l The software service may not configurable according to the different camera models.
Figure 12-14 Service Settings
12.9 Debug Maintenance
When logging in with admin user, you can see the interface. Check the
checkbox to enable the fnction.
After enabling the function, the debug and maintenance information will be stored in the flash
of the camera. You can choose to store all the information, of the alarm and error information.
You can also export the information by clicking .
Figure 12-15 Debug Maintenance
NOTE
l The storage capacity of the flash is 2M. If the storage capacity limit is reached, the system overwrites
the data.
l The debug information can be used to identify the problem when error occurs.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
12 Others
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
129
To Next Page
Loading...
